Rancang Bangun Sistem Monitoring dan Proteksi Beban Lebih pada Proses Warming Up Genset Berbasis Internet of Things

Authors

  • ID Priyanto Institut Teknologi Indonesia Tangerang Selatan Indonesia Author

DOI:

https://doi.org/10.66914/41brg027

Keywords:

generator set, warming up, Internet of Things, ESP32, PZEM-004T, Blynk, overcurrent protection.

Abstract

Generators that are operated infrequently still require periodic maintenance, including warming-up operation to maintain operational readiness. Manual monitoring has limitations in recording operating time and electrical parameters. This study designs an Internet of Things (IoT)-based generator warming-up monitoring system using an ESP32 microcontroller, PZEM-004T sensor, DS1307 Real Time Clock (RTC), LCD, relay, buzzer, and Blynk application. The system measures voltage, current, power, frequency, and operating time, then displays and stores the data through Blynk. The overcurrent protection threshold is set to 3 A. Tests using six load variations produced voltage values of 228–232 V, current values of 0.04–2.13 A, and power values of 5–480.1 W. The reported average measurement errors were 0.8% for voltage, 4.4% for current, and 1.4% for power. During an overcurrent test at 3.30 A, the system detected the condition and disconnected the load supply through a relay within 1.05 seconds, accompanied by an alarm/notification. Data-storage tests showed that warming-up operating data could be recorded in Blynk in real time. The prototype therefore supports electrical-parameter monitoring and warming-up operation records, subject to Wi-Fi availability.

Downloads

Download data is not yet available.

Author Biography

  • Priyanto, Institut Teknologi Indonesia Tangerang Selatan

    Program Studi Teknik Elektro, Institut Teknologi Indonesia, Tangerang Selatan

References

Aditya, A. (2016). Generator Sinkron. https://documents.tips/documents/generator-sinkron-568d0bd7f255b.html

Blynk. (2017). Blynk. http://www.blynk.cc/

Habibi, F. N., Setiawidayata, S., & Mukhsima, M. (2017). Alat Monitoring Pemakaian Energi Listrik Berbasis Android Menggunakan Modul PZEM-004T. Seminar Nasional Teknologi Elektro Terapan 2017, 157–162.

Junaidi, A. (2015). Internet of Things, Sejarah, Teknologi dan Penerapannya. Jurnal Ilmiah Teknologi Informasi Terapan.

Kadir, A. (2013). Panduan Praktis Mempelajari Aplikasi Mikrokontroler dan Pemrogramannya Menggunakan Arduino. Yogyakarta: Andi.

Mubina, F. F., & Firasanto, G. (2023). Pemantauan dan pengendalian pemakaian energi listrik berbasis IoT. EPIC Journal of Electrical Power Instrumentation and Control, 5(2), 216. https://doi.org/10.32493/epic.v5i2.28419

Suprihatin, A., & Munir, M. (2026). Rancang bangun sistem proteksi over current relay dengan karakteristik inverse sesuai IEC 60255 terintegrasi IoT untuk monitoring jarak jauh. JTERA (Jurnal Teknologi Rekayasa), 11(1), 181–188. https://doi.org/10.31544/jtera.v11.i1.2026.171-180

Widiasari, C. (2019). Sistem Monitoring Tangki dan Penghitung Runhour Genset Otomatis Berbasis Internet of Things (IoT).

Witczak, D., & Szymoniak, S. (2024). Review of monitoring and control systems based on Internet of Things. Applied Sciences, 14(19), 8943. https://doi.org/10.3390/app14198943.

Downloads

Published

2026-11-17